0.25T FRP Manual Ultrapure Water System With Multi Way Regulating
Valve
1. Ultrapure Water System Advatage
1. After the machine is turned on, the device realizes the
automatic film rinsing function, and the rinsing time is adjustable
from 2 to 10 minutes.
2. The equipment has a wastewater return device, which can be used
for secondary use of water to improve water utilization and save
water costs.
3. Low-voltage protection system, when the source water pressure is
insufficient or passive water, the equipment will automatically
stop, protecting the high-pressure pump and equipment safety.
4. The equipment can be automatically shut down after the water
tank is full.
5. The equipment is equipped with a cleaning and maintenance
system, which can regularly clean and maintain the equipment and
prolong the service life of the reverse osmosis membrane for 3-5
years.
6. The equipment adopts stainless steel frame structure to achieve
no sanitary corners, and the equipment is non-corrosive. It is
still as new as 10-20 years.
7. The two-stage reverse osmosis equipment is equipped with
multi-way regulating valve, which can realize double-stage
effluent, single-stage effluent or single-stage effluent at the
same time, so that the water quality is diversified.
8. Reverse osmosis equipment can be used with mineral water
equipment (mountain spring water equipment) to reduce investment
costs and improve water resource utilization.
9, the equipment can basically achieve 24-hour unattended
operation.
2. Ultrapure Water System Details
kyro-250lph RO Water Purifier Machine
+200lph EDI ultrapure water equipment
| 1. Capacity: 250L/H RO + 200L/H EDI |
| 2. Rated power: 4.0KW/H |
| 3. Voltage: 110V/220V/380V, 50Hz/60Hz, single phase/3phase |
| 4. Desalting rate:>=97% |
| 5. Water recovery rate: 50-75% |
| 6. Conductivity of raw water: ≤400μs |
| 7. Conductivity of 2stage pure water: ≤2μs |
| 8. Conductivity of EDI pure water: <=1μs |
Capacity
| Model | Capacity | Recovery Rate | Desalination | Output power | Membrane Brand | RO Rack Size (mm) |
| KYRO-250 | 250L/H | 50% | 97% | 1.5kw | USA-DOW | 1550*620*1670 |
| KYRO-500 | 500L/H | 50% | 97% | 1.5kw | USA-DOW | 1650*630*1800 |
| KYRO-750 | 750L/H | 50% | 97% | 2.5kw | USA-DOW | 1870*630*1850 |
| KYRO-1000 | 1000L/H | 50% | 97% | 2.5kw | USA-DOW | 1870*650*1850 |
| KYRO-1500 | 1500L/H | 50% | 97% | 3.0kw | USA-DOW | 2440*750*2000 |
| KYRO-2000 | 2000L/H | 50% | 97% | 3.5kw | USA-DOW | 2440*650*1750 |
| KYRO-3000 | 3000L/H | 50% | 97% | 4.0kw | USA-DOW | 2440*620*1850 |
| KYRO-4000 | 4000L/H | 50% | 97% | 5.0kw | USA-DOW | 2000*900*1800 |
| KYRO-5000 | 5000L/H | 50% | 97% | 7.5kw | USA-DOW | 2000*900*1800 |
| KYRO-6000 | 6000L/H | 60% | 97% | 9.5kw | USA-DOW | 3000*900*1800 |
| KYRO-8000 | 8000L/H | 60% | 97% | 13.5kw | USA-DOW | 3000*900*1800 |
| KYRO-9000 | 9000L/H | 60% | 97% | 14.0kw | USA-DOW | 3000*900*1800 |
| KYRO-10T | 10M3/H | 60% | 97% | 19.0kw | USA-DOW | 4000*900*1800 |
| KYRO-12T | 12M3/H | 60% | 97% | 19.5kw | USA-DOW | 4000*900*1800 |
| KYRO-15T | 15M3/H | 60% | 97% | 23kw | USA-DOW | 4000*900*1950 |
| KYRO-20T | 20M3/H | 60% | 97% | 28kw | USA-DOW | 5000*900*1950 |
| KYRO-30T | 30M3/H | 60% | 97% | 55kw | USA-DOW | 7000*900*1950 |
| KYRO-50T | 50M3/H | 75% | 97% | 58kw | USA-DOW | 7000*1500*2100 |
Ultrapure Water System Performance:
*Main part (membrane) of reverse osmosis system is imported from
USA.
*Auto stop when no water and full water.
*Auto controller, RO membrane auto flush to protect membrane.
*Auto start when pure water tank have no water.
*Low pressure protection switch to protect high pressure pump when
there is no raw water.
*High efficient and low noise high pressure pump.
*Product water conductivity meter to monitor product water quality
all the time.
*Input water and output water pressure gauge to monitor RO membrane
*differential pressure to remind it's time for chemical cleaning.
*Inlet water solenoid valve to stop water when machine is stop.
Component:
There are several kinds of consumables you need to replace
regularly.
a. Quartz sand: replaced about every 15 months. 50kg/bag
b. Activated carbon: replaced about every 15 months. 25kg/bag
c. Resin: replaced about every 15 months. 25L/bag
d. PP Filter cartridge: replaced about every 1 month
e. Ro membrane: replaced about every 2 year.
We suggest you buy 1- 2 years of PP filter cartridges together with machine. Because these PP filter cartridges need to
replace every month.
Optional Components:
A. Regulating wheels
B. PC Touch Screen
C. Two-stage RO system
D. PH adjustment
E. CIP cleaning system
F. Auto or manual control valve
G. U-PVC or stainless steel pipe
H. UV sterilizer/Ozone Generator
I. Dosing system(anti-scale)/Water Softener
J. PE or stainless steel raw/pure water tank
K. FRP or stainless steel pre-treatment tank
Application:
Feed water(source water):
City water, river water, lake water, underground water(borehole,
well), brackish water, sea water......
Treated water:
1. Electronic industry: Pre-filter for ultra pure water, chemical
products and pure water
2. Food and beverage industry: filter for mineral water, wines and
fruit juice
3. Medicine industry: filter for drug liquid, gases
4. Chemical industry: filter for organic solvent
5. Petroleum industry: filter for oil-field flooding
**Textile, chemical industry, process water / chemical recycled
water, chemical products manufacturing purification and preparation
of water ;
**Food and beverage industrial water, purified drinking water,
beverages, beer, liquor, health care products such as water
purification and preparation of water;
**Seawater, brackish water desalination islands, ships, offshore
drilling platforms, brackish water areas
**Larger community, real estate property, schools, factories,
hospitals, and the restaurants, hotels, beauty salons, canteens and
other various types of enterprises and institutions.
**Integrated circuits, silicon wafers, display tubes and other
electronic components of electronic industrial water rinse water
**Can be used for filling water bottled water, mineral water and
other preparation work
