1). RO pure water equipment main parameters
Name: | RO pure water equipment |
Specification: | model: kyro-20TPH capacity of pure water : 20000l/h 25°C general power: 128kw electrical power: ac380v 35a 50hz ro membranes: espa 8040 beforehand filter:4872 frp 2 items 3672 frp 1 item out size of main machine (mm): 3500x1200x1920 out size of beforehand filter(mm):5000x1600x1920 |
2). Function of the machine:
| ro membranes auto wash and manual wash |
| ro membranes manual wash wite medicine |
| pure water high water level auto stop,low water level auto start |
| multi-phases pump protected without water |
| protected when no power ,poor power,larger electrical current |
| short circuit, creepage of electricity |
We use SUS 304 / FRP tank to fill quartz sand and active carbon.
The controlling machine is made of stainless steel, as well as .
All water water pipes is PVC material.
| 1. RO system means reverse osmosis system, which is the most
advanced technique in pure drinking water treatment. |
| 2. This machine can be design for small or large scale water
factory according to the output. |
| 3. This machine follows four steps to purify raw water, make sure
the most pure drinking water. |
| 4. We design all kind of protecting measures against no power, poor
power, larger electrical current, short circuit, creepage of
electricity and so on. |
3). Design basis
1. Source of water:tap water, if not ,pls provide the report for water quality.
2. Water production specifications
Note: Water capacity will be changed when the water temperature is
down 1 °C,
and water production would be decreased by 3%.
Desalination system: ≥97%
Water recovery: 50-75%
4). The system process
Raw water→ raw water tank→ raw water booster pump→mechanical
filter→activated carbon filter (→water softener machine)→precise
filter →(cleaning device) high-pressure pump→Reverse Osmosis
Components→pure water tank(→Ozone device/UV device) →pure water.
Some parts function:
1.Raw water pump: provide needed pressure for every pre-treatment filter;
2.Quartz sand filter: use fiber glass as housing, fill quartz sand, it can filter big
particles impurities, suspended substances, colloids etc. Important
to remove iron and sediments you mentioned;^^
3.Activated carbon filter: use fiber glass as housing, fill activated carbon, remove color,
odor, residual chlorine and organics substances;
4.Security filter: prevent large particles, bacteria, viruses into RO membrane,
accuracy is 5µm;
5.High pressure pump: provide needed working pressure for RO system, ensure production
capacity of pure water;
6.RO system: can remove particles, colloids, organic impurities, heavy metal
ions, bacteria, virus, heat source etc. harmful substances and 99%
dissolved salts.
7.Ozone generator(for bottled drinking): can continue to kill bacteria even water
fill into bottled,viruses,cell damage,atc...
