The Reverse Osmosis Process uses a semipermeable membrane to
separate and remove dissolved solids, organics, submicron,
colloidal matter,viruses, and bacteria from water. The process is called ‘’reverse’’
osmosis since it requirespressure to force pure water across a membrane,leaving the impurities behind. Reverse Osmosis is capable of
removing 95-99% of the total dissolved solid (TDS) and 99% of all bacteria,Thus providing safe, Pure Water.
Feed Water for this plant:
Tap water, Well water, Brackish water,underground water, river
water
Outlet water quality:
- Desalination rate >99%, removing of all bacteria,most iron
- Conductivity<15us.cm@25C
- support design according to customers' requirment
- support capacity from 250liters to 100000liters per hour
Water treatment main components:
| Component name | Material/brand | Function |
Multi-media filter |
FRP tank,automatic | used to filter sand and sediment (turbidity) down to approximately
20 Microns |
| Activated Carbon filter |
FRP tank,automatic
| remove chlorine from feed water, which protects TFC membrane from
damaging chemical reaction with chlorine(will not need if the raw
water is well water) |
| Anti-scale dosing unit |
automatic dosing | dosing anti-scale chemical provent Ca,Mg iron from scaling tp
protect membrane |
| Precision filter |
stainless steel
| futher filting of the water before inlet to ro membrane,protect
high pressure pump and ro membrane |
| High pressure pum |
CNP brand | provide the necessary pressure for ro membrane |
| RO membrane |
DOW USA, FRP vessel housing | desaliation rate of dow 8040 ro membrane is above 99%,removing over
99% irons |
| CIP system |
PE tank | usually provide a clean tank and a clean pump |
System features
1. Design recovery rate for whole plant can up to 80%
2. PLC automatic control, manual/auto switching
3. Auto flush for ro membrane,filter
4. Low&high pressure protection, water level on-line
monitoring, water conductivity on-line display
5. Equipment with pressure gauge, flow meter ,etc to real-time
monitoring
What can we made for?
We can custom design for your application and water quality
requirement,In past 12 years, Molecular have get rich exprienced in
different application, mainly includes following
1. Economic ro system
suitable for some common applciation require pure water, like
boiler feed water, chemical industry process water, process
cleanning water,ect
2. Drinking, Pure, Mineral water ro system
meet GB FDA drinking or bottled water standard, whole SS304 with UV
and ozone generator disinfection
3. RO+EDI ultrapure water system for electronic industry,speciaty
metierals
this kind ultrapure water widley used in process, cleanning for
LED,LCD,PDP,PCB,IC
4. RO+EDI+pasteurization system for pharmacuetical/injection
Meet GMP, USP standard, we have customized above 100 pharma factory
of water purification system, all design is strict based on
national pharma pure water design requirement.
System is with complete monitering system, on-line display,
disinfection and anti-bacterial.
5. Medical grade water system for dialysis,supply room
strong at water purification system for dialysis machine in
hospital, get II type medical mechinery certification
Following photos is some pictures we custom made for our customers,
just for reference
6. Other
Also strong at water softener system for boiler, containerized
mobiler water system, Boron ,As removing sysem
.....
